Is Your Heat Pump MULTI-TASKING” ??

( @ SCOP >8+ )

– – – If NOT, you are Losing Benefits & $$$ 

!!!

 

Sadly, 96% of EU/UK Heat Pumps are only giving end-user Benefits as:  

Central Heating & Hot Water @ COP only 3-5 !!

Our Workhorse

© 1993-2038 Sol-Air Industries Group.

  1. All stainless, Centrifugal Fan + E.S.P. for System ducting;
  2. All stainless, Sealed VSD Marine duty Fan Motor;
  3. All stainless, high velocity VSD Marine duty Pump;
  4. Head Pressure Control (R32) + Transducer;
  5. VSD Scroll Compressor (R290/R32/R744);
  6. Marine Grade, ultra-eff. 100% Copper DX-Coil Evaporator;
  7. All stainless, Cabinet/Dividers & Tek Fasteners;
  8. All stainless, Double Wall, COAXIAL Condenser;
  9. Cabinet interior acoustic Sealing @ 32dBa;
  10. All components inter-changeable at site

But the decades of expertise by this Academy delivers 8+ extra Benefits by “very smart design”:  

(refer to Tech.Thoughts #8)

  1. Site-specific hybrid combinations; ASHP~WSHP~GSHP~SOLAR;
  2. Low.Temp. Hydronic C.H. + Medically certified sanitary Hot Water;
  3. Medical Health IAQ by Allergen; PM2.5; VOC + Microbial removal;
  4. Optimised Dehumidification Comfort for end-user Control;
  5. Amped-up SCOP by on-roof, Solar PV+ST Roof + Facade Panels(Passive Energy);
  6. Full Resilience + Redundancy + longer Durability;
  7. Hard-wired hybrid controls as an Elite building Fail-Safe RETROFIT;
  8. Lowest Life Cycle Cost & Fast ROI @ SCOP >8+;

…..and there are TWO even higher levels of Benefit from a Heat Pump “holistic” System Design to multiply added-Value end-user benefits, to RETROFIT Heritage & Historical Buildings and Prestigious Elite Properties that plan to “future-proof” Decarbonise.

N.B.

All design specifications in compliance to updated ASHRAE/CIBSE Stds.+ local Building Codes & Medical Regulations.

N.B. The Heat Pump Academy Team of Associates has accumulated:

>4,800 Commercial Heat Pump System Retrofit Designs – Accepted for F.F. Boiler Shutdown;

>1,200,000 Solar Panel Array Retrofit Designs – Accepted for F.F. Boiler Shutdown;

>297 man-years of P.E. expertise for Analysis & Design – Accepted by 38 National Jurisdictions.

Architect / Consultant Services:

  • Site-specific Thermal & M.E.P. Analysis;

  • Retrofit Optimisation, Higher-Value Engineering;

  • Investment Analysis: CAPEX; OPEX; LCOE.

Design & Build Contractor Support:

  • Contractor’s Design Revision;

  • Up-Valued Design & BOQ Savings;

  • Building Regs. & Code Compliance.

A Heat Pump is JUST a Heat Pump; it is THE SYSTEM that MULTIPLIES the BENEFITS